When I first picked up a T-grip for our Charter Arms Undercover .38 special it was out of necessity since I had put Barami Hip Grips on it so I could use it as a "Stuff & Go" gun. I couldn't get a solid or consistent grip using just the Hip Grips so on went the T-grip. The one I got for it was originally designed for a S&W N-frame which has a slightly longer grip so I had to trim up the bottom a bit to get it to line up with the bottom. I had then sprayed the T-grip with PlastiDip spray to cover the trim job & give it more grip. I've found over the past year that PlastiDip does not wear well. It has a tendency to rub off and then the whole thing will start to peel. While walking the aisles at Home Depot I spotted some Rustoleum texture paint (used for painting outdoor patio furniture) that looked to be a good replacement to the peeling PlastiDip.
I decided to go ahead and prime the T-grip using a gray automobile primer first before applying the textured paint. All it took were two quick coats of primer followed by two coats of the textured paint. The combination of the two gave it a nice dark gray which contrasts well with the stainless finish and glossy black of the Hip Grips.
The textured paint gives the grip a sufficently rough surface without making it overly abrasive.
I'm very happy with how it turned out and after a couple months of use I'll report back on how well it holds up.